Message
We are here to help you.
09262
9Pc. VDE Insulated Tool Set
Introduction
| ● | 61311 G series slotted insulating screwdriver with tricolor handle 2.5x75MM | ||||
| ● | 61313 G series slotted insulating screwdriver with tricolor handle 4x100MM | ||||
| ● | 61314 G series slotted insulating screwdriver with tricolor handle 5.5x125MM | ||||
| ● | 61211 G series insulated Phillips screwdriver with tricolor handle #0 x 60MM | ||||
| ● | 61212 G series insulated Phillips screwdriver with tricolor handle #1 x 80MM | ||||
| ● | 61213 G series insulated Phillips screwdriver with tricolor handle #2 x 100MM | ||||
| ● | 70333 G series VDE insulated and voltage withstand linesman pliers 8" | ||||
| ● | 70232 VDE insulated and voltage withstand diagonal cutting pliers 6" | ||||
| ● | 70131 VDE insulated and voltage withstand long nose pliers 6" | ||||
| ● | Certified against German VDE and proved by 10000V dielectric withstand voltage test, in compliance with IEC/EN 60900. | ||||
| ● | VDE insulated and voltage withstand pliers, with its body made of Cr-V (chrome-vanadium steel) and | ||||
| ● | its surface plated with nickel-iron alloy, highly resistant to rust | ||||
| ● | Shearing capability of VDE insulated and voltage withstand pliers up to ASME standards: Diagonal | ||||
| ● | cutting pliers ASME B107.11-2002, linesman pliers ASME B107.20-2004, long nose pliers ASME B107.13-2003 original VDE insulated and voltage withstand screwdriver imported from Germany, with its performance meeting with | ||||
| ● | DIN7437, DIN7438, DIN5264, ensuring good quality |
Product Details
| Product No | 09262 |
| MADE IN | China |
| Outside Length（cm） | 30 |
| 認(rèn)證/標(biāo)準(zhǔn) | Verified by German VDE, each product has been tested by insulation and withstand voltage of 10000V and accord with IEC/EN 60900 standard. |
| Net Weight (kg) | 1.28 |
| Outside Height（cm） | 4 |
| Outside Width（cm） | 29.5 |
| pcs / pack | 9pc |
| Warranty Terms | Please refer to warranty terms of each single product in the set. |
| Tool List | For products in detail, please refer to the tab 'Introduction' |
